Readme: Note: As of March 2021, all RAK's WisGate Edge gateways are running the new WisGateOS. This also requires a change in the version control of the firmware. That's why WisGateOS starts with version 1.x.x. ====================WisGateOS v1.3.9==================== Release date: June 27, 2023 • Upgrade WisDM agent to 1.2.3 ====================WisGateOS v1.3.8==================== Release date: May 17, 2023 New features: WisGateOS-related fixes: • Fixed an issue where the cellular connection could not be established after a reboot sometimes. Also addressed the channel autoselect option. • Resolved the problem with FineTimestampType uplink to ChirpStack value being set to NONE. • Fixed the Frame Buffer Backup (Automatic data recovery) to TTN in Packet Forwarder mode. Packet timestamps are now correctly recovered. • Addressed a scenario where downlinks were rejected by the forwarder. • Fixed an issue where the built-in NS would fall into a loop when the MQTT client TLS version did not match the MQTT broker. • Using the AWS IoT MQTT client to subscribe to 64 bytes of uplink data will now receive the data properly after 1 minute. • Basics Station now connects to Actility NS after the gateway is rebooted. • Devices can now join the Built-In server even if the Global integration uses TLS V1. • Fixed an issue with backup files in WisGateOS versions 1.3.1(b41) to 1.3.5(b135). • Resolved the problem where the RSSI value of FSK channel data displayed on the RAK2287 gateway exceeded the expected range. • Addressed the issue where RSSI levels were displayed as 2 or 0 in WisGateOS 1.3.6. • Fixed the inability to select Basics Station as the work mode in RAK7289C-8Channel(USB), where USB-7289C BS was disabled. • After inserting the SIM card and disabling the cellular function, the values for signal level and network are now updated correctly. • Reduced the default ping interval for 4G to minimize SIM data consumption. • Fixed an issue where lorasrv became abnormal after setting the SSL/TLS Mode to Self-signed server & client certification and configuring the certificate. • Resolved the problem where Basics Station mode failed to obtain beacons in TTN and AWS class B modes. • Fixed the "Bad Gateway 502 error" that occurred when using the MQTT protocol to connect to Azure IoT Hub through PF mode. ====================WisGateOS v1.3.6==================== New features: • Added WisDM quick link in the WebUI bottom bar. WisGateOS-related fixes: • Class B beacon cannot be received. • After connecting to TTN, join issues in the AS923 band. • Downlinks are rejected by the forwarder in some cases. • AWS IoT MQTT client failed to subscribe to the topic if the message is 64 bytes. • Basics Station won't connect to Actility NS after the gateway is rebooted. • Devices can not join the built-in server if the Global integration uses TLS V1. • In case of backup restore without a backup link, the WebUI shows a blank page. • MultiWAN default ping interval field setting to 10 minutes. • Minor issues with the cellular status. • The RSSI value of FSK channel data exceeds the expected range. • AS923-1/AS923-2/AS923-3/AS923-4, the Join Accept message carries FSK and STD channels, which does not conform to the Lora protocol specification. • In the end device page, in Built-In Server mode, when the value of the page is set to 0 or a negative number, the page will crash. ====================WisGateOS v1.3.5==================== New features: • Update to the latest WisDM agent • Update the OpenSSL to version 1.1.1 WisgateOS-related fixes: • White list bug fixed in PF mode • Fix AWS connection auto recovery in case of LTE fault • Fix RSSI incorrect in the AS923 band ====================WisGateOS v1.3.4==================== New features: • Support system time packet timestamping for the WisGate Edge without GPS WisGateOS-related fixes: • Azure IoT Hub certificate deleted after the update • Breathing light fix in Basics Station mode for WisGate Edge Lite 2 • Cellular signal status • AWS IoT Core certificate lost after a power outage • EU433 band gateways failed to start after the power cycle • System log garbage ====================WisGateOS v1.3.3==================== WisGateOS-related fixes: • Fix LoRa LED is off after reboot in Basics(tm) Station(BS) mode • Fix Configuration data lost after disable/enable OpenVPN. • Fix the OpenVPN configuration file that can't be uploaded by the upload file function. • Fix the Breathing light abnormalities in BS mode. • Fix On the dashboard interface, the subscripts of the Airtime(s)/Min table are displayed in reverse order. • Fix Gateway Wi-Fi is switching in multi-AP (with the same SSID) so that the WiFI connection is unstable. • Fix If the gateway runs for more than one hour, the display of the three network statuses of multi-wan will be abnormal. • Fix the default value of the system log buffer size(System->System->Logging->System log buffer size) with the wrong size. • Fix the issue with system logging on the SD card. WisDM-related fixes: • Fix in some cases the Firmware is damaged during OTA from WisDM. • Fix Wisdm agent can not report the interface rollback event to shadow when the network rollback happened. ====================WisGateOS v1.3.2==================== WisGateOS-related fixes: • In Packet Forwarder mode, packet loss is monitored when sending multiple packets with a payload size of 222b. WisDM-related fixes: • Gateway performs a factory reset unexpectedly after the firmware upgrade from 1.0.2 to 1.3.1. ====================WisGateOS v1.3.1==================== New Features: • Support Log rotation storage WisDM-related fixes: • Fix WisDM: Wi-fi interface error • Fix WisDM: RAK7268/RAK7289 device MAC address error • FiX WisDM: sub-band cannot apply to the 16channels gateway ( US915/AU915 ) WisGateOS-related fixes: • Fix WisGateOS Version: WisGateOS 1.2.3_RAK,build in NS can’t start in AS923 • Fix MQTT QoS level typo • Fix WisGateOS1.2.1: AWS connection status is ‘disconnect’ after running 24H when the gateway working in BS mode. • Fix Wi-Fi: In client mode, the SSID field has a space by default. • Fix UI crash when removing all of the devices. • Fix the UI bug that the OUI List、Network ID is editable if disable the white list. • Fix Alias IP does not work when the MAC address ends with 0xFF or 0x00 • Fix the Wi-Fi channel lost after WisGateOS_1.0.2 • Fix the Devaddr name and have a strict rule to distinguish the capital • Fix the Wi-Fi unstable issue • Fix the NS Ping slot DR is different from PF IN865 ====================WisGateOS V1.2.3==================== Fixed: • WisDM device information error. ====================WisGateOS V1.2.2==================== Fixed: • Starting from version 1.2.1, WAN Interface Protocol has lost multiple options such as pppoe, none, etc. ====================WisGateOS V1.2.1==================== New Features: • Support SX1303 • Support Wi-Fi Client static IP address configuration. • Support AS923-2/3/4. Fixed: • Fix the air time that doesn’t appear on the packet logger page when the WisGateOS1.1.1 connected with AWS in Basics station mode in US915 • Fix Luci: LTE status in overview page - RSSI cannot be displayed. • Fix Luci error when switching regions in advanced mode. • Fix RAK7249 the LoRa Concentrator1 ‘Disable’ invalid in wisgateOS-1.1.1 advance mode. • Fix the channel frequency changing in WisGateOS1.1.2 if the region is in AS923, WisGateOS1.1.2 channel frequency can’t be changed in advance mode. • Fix multicast default pingslot data rate is not the protocol suggested value in class B in WisGateOS1.1.2. • Fix the application key that can’t be changed in WisGateOS1.1.2 when exporting the nodes. • Fix the packet forwarder cycle reboot if the AS923 beacon is set in SF7 or SF11 in r213. • Fix the application ID verification missing in 1.0.1 if the user uses ABP class C and sends downlink unicast via MQTT. • Fix the beacon that couldn’t be sent in WisGateOS1.1.1. • Fix the LoRa std button that couldn’t be closed in Channel Plan advanced mode. ====================WisGateOS V1.1.2==================== Features • Disable insecure ciphers. ====================WisGateOS V1.1.1==================== New features: • Support Multiple WAN • Support customized breathing light • WiFI IP address display in the dashboard • Support the FTP feature Fixed: • uhttpd error in syslog: ERROR Connection Refused. • Ethernet port can not work when switching to LAN mode. • Switch wifi mode behavior. • The PingSlot Datarate can't be set to DR0 in US915 RAK7249-r213 if the mode is built in NS. • The PingSlot Datarate can't be set to DR0 in IN865 RAK7249. ====================WisGateOS V1.0.2==================== Fixed: • Fix Wi-Fi client can not associate with the hidden SSID. • Fix critical dropbear security issues to improve the security capability. • Fix switch wifi mode behavior. • Fix Luci Wi-Fi work mode error in Safari. • Fix LoRa channel plan calculation update. ====================WisGateOS V1.0.1==================== Features • Support days (D) in uptime. • Show the model name and WisGate OS version in the SSH banner. • Update the RAK logo and theme. • Support RAK7268. • Support WisDM. UI Updating points: • Integrated WisDM agent in the navigation tree and the flash image is disabled in WisGateOs by default.